Hazard Statements

Precautionary Statements

P201: Obtain special instructions before use P202: Do not handle until all safety precautions have been read and understood P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources - No smoking P211: Do not spray on an open flame or other ignition source P251: Pressurized container - Do not pierce or burn, even after use P260: Do not breathe dust/fume/gas/mist/vapours/spray P264: Wash ... thoroughly after handling P270: Do not eat, drink or smoke when using this product P273: Avoid release to the environment P280: Wear protective gloves/protective clothing/eye protection/face protection P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting P302+352: IF ON SKIN: Wash with plenty of soap and water P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing P305+351+338: IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing P307+311: IF EXPOSED: Call a POISON CENTER or doctor/physician P332+313: IF SKIN IRRITATION OCCURS: Get medical advice/attention P337+313:: IF EYE IRRITATION PERSISTS: Get medical advice/attention P362+P364: Take off contaminated clothing and wash before reuse. P391: Collect spillage P403: Store in a well ventilated place P405: Store locked up P410+412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F P501: Dispose of contents/container in accordance with local/regional/national regulations Not Present: Do not apply while equipment is energized. Not Present: Extinguish all flames, pilot lights, and heaters. Not Present: Vapors will accumulate readily and may ignite. Not Present: Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying. Not Present: If you experience any symptoms listed on this label, increase ventilation or leave the area. Not Present: Exposure to high temperature may cause can to burst.